Filter
Top Products
4 Configuring the system
74
disk before proceeding. During the migration process, the data on
the source disk will be preserved.
Create RAID Volume from Existing Disk
To create a RAID volume from an existing disk, right-click on "RAID
Volume" and select "Create From Existing Disk" to create a new RAID
volume as shown in the screen below. You may also use the RAID drop-
down menu and click on "Create Volume from Existing Disk."
1 Select the source disk that you wish to use and then click Next.
Important: It is very important to note which disk is the source disk
(the one containing all of the information to be migrated) and
which one is the target disk. On a RAID Ready system, this can be
determined by making a note during POST of which port (e.g. Port
0 or Port 1) the single disk is attached to. You can also use the Intel
BB!H421!.!FO/cppl!!Qbhf!85!!Gsjebz-!Nbz!8-!3115!!2;42!QN