Filter
Top Products
Appendix A: ASM Pro quick installation guide
132
2 Mount the CD-ROM drive. For example, mount the CD-ROM to /
mnt.
3 Insert an empty 1.44-MB diskette into your floppy drive and
execute the command:
# dd if={PATH}/asmuw.dd of=/dev/rdsk/f03ht
Here, {PATH} denotes the directory where asmuw.dd is located.
For example, /mnt/UnixWare.
4 Insert the ASM Pro installation diskette into your floppy drive and,
at the shell prompt, execute this command to begin ASM Pro
installation:
# pkgadd -d diskette1 asm
The installation process copies the ASM Pro Server Agent package into
the /usr/asm directory, and automatically makes changes to the
following system configuration files:
/etc/netmgt/snmpd.comm
/etc/netmgt/snmpd.peers
/etc/inittab
After the installation is complete, ASM Pro Server Agent can be
manually started by executing the command:
# /usr/asm/asmsmuxd
or it will be automatically started on the next system reboot.
Note: Before starting ASM Pro SMUX Agent asmsmuxd, execute
the ASM Pro Agent Configuration Utility asmcfg to configure at
least "SNMP", "ASM Pro_Password" and other parameters. Refer
to “Chapter 4 - ASM Pro Server Agent Utilities” in the ASM Pro
manual for detailed instructions on using the ASM Pro
Configuration Utility.
Installing the Microsoft Windows NT V4.0 Server or
Windows 2000 Server/Advanced Server Agent
Note: Before installing the ASM Pro software, make sure that the
TCP/IP and its related SNMP service are installed on the server.
AA G610.book Page 132 Monday, October 22, 2001 9:46 AM