A SERVICE OF

logo

3 Upgrading your system
62
Note: Refer to “Mainboard layout” on page 54 for the location of
the SCSI connector.
4 Replace the housing panels.
System board connector cable
Removing the BPL5M hot-swap cage
1 Remove the housing panels. Refer to page 51 for more detailed
instructions.
2 Remove the two screws that secure the hot-swap cage to the
housing.
No. Item
1 Connects to the mainboard
2 Blue strip with red edging
3 Connects to the hot-swap cage
AA G610.book Page 62 Monday, October 22, 2001 9:46 AM