Filter
Top Products
61
02D0 System cache error -
Cache disabled
RAM cache failed and BIOS disabled the
cache. On older boards, check the cache
jumpers. You may have to replace the cache.
See your dealer. A disabled cache slows
system performance considerably.
02F0: CPU ID: CPU socket number for Multi-Processor error.
02F4: EISA CMOS not
writeable*
ServerBIOS2 test error: Cannot write to EISA
CMOS.
02F5: DMA Test Failed* ServerBIOS2 test error: Cannot write to
extended DMA (Direct Memory Access)
registers.
02F6: Software NMI Failed* ServerBIOS2 test error: Cannot generate
software NMI (Non-Maskable Interrupt).
02F7: Fail-Safe Timer NMI
Failed*
ServerBIOS2 test error: Fail-Safe Timer takes
too long.
device Address Conflict Address conflict for specified device.
Allocation Error for: device Run ISA or EISA Configuration Utility to
resolve resource conflict for the specified
device.
Failing Bits: nnnn* The hex number nnnn is a map of the bits at
the RAM address which failed the memory
test. Each 1 (one) in the map indicates a
failed bit. See errors 230, 231, or 232 above
for offset address of the failure in System,
Extended, or Shadow memory.
Invalid System
Configuration Data
Problem with NVRAM (CMOS) data.
I/O device IRQ conflict I/O device IRQ conflict error.
One or more I2O Block
Storage Devices were
excluded from the Setup
Boot Menu
There was not enough room in the IPL table
to display all installed I2O block-storage
devices.
Error Messages Corrective Action
TMC110-en.book Page 61 Friday, March 21, 2003 2:02 PM