Filter
Top Products
4 Setup utility
54
SuperIO Configuration
• Onboard Serial Port 1
Use these items to disable the serial ports or to assign a port
address and IRQ to the ports.
• Onboard Parallel Port
Use this item to disable the parallel port or assign a port address to
the parallel port.
• Parallel Port IRQ
Use this item to determine the IRQ of the parallel port.
• Parallel Port Mode Select
Use this item to determine the mode of the parallel port. You can
select Normal, Bi-directional, EPP (Enhanced Parallel Port) or ECP
(Extended Capabilities Port).
• Parallel Port DMA Channel
These items are not available in most circumstances. If they are
available, use them to allocate DMA (Direct Memory Access)
channel for the parallel port.
Remote Access
Configuration
Configure Remote Access.
Parameter Description
SuperIOChipsetNat414
Advanced
ConfigureNat414SerialPort(s)andParallelPort
___________________________________________________
SerialPort1(Address/IRQ) [3F8/IRQ4]
ParallelPortAddress [378]
ParallelPortIRQ [7]
ParallelPortMode [ECP]
ECPModeDMAChannel [3]
SelectScreen
SelectItem
+- ChangeOption
F1 GeneralHelp
F10 SaveandExit
ESC Exit
V02.03©Copyright1985-2000,AmericanMegatrendsInc.