Filter
Top Products
69
Setup submenu: Power
Parameter Description Options
AC Power
Failure
This sets the power state after a
shutdown due to an unexpected
interrupt of AC power. If the value is
set to “Stay OFF,” the system
remains turned off. If the value is set
to “Last State,” the system returns
to the last power state.
Last State
Stay Off
Power Button
Mode
If this item is set to “On/Off,” the
power button acts as a standard on/
off switch. If you set this item to
“Suspend,” pressing the power
button enters the system into a
power-saving suspend mode.
On/Off
Suspend
Enable RTC
Resuming
From S4
Enable or Disable RTC (Real Time
Clock) resume from ACPI S4. If this
option is set to “Enable”, the system
could wake up from ACPI S4
(Hibernation in Windows 2000/.NET)
if O.S. configured properly.
Enable
Disable
BIOSSETUPUTILITY
MainAdvanced PowerBootSecurityExit
ACPowerFailure [LastState]
PowerButtonMode [On/Off]
EnableRTCResumingFromS4 [Enabled]
SelectScreen
SelectItem
+- ChangeOption
F1 GeneralHelp
F10 SaveandExit
ESC Exit
V02.03©Copyright1985-2000,AmericanMegatrendsInc.