Filter
Top Products
3 Upgrading the system
46
2 Remove the four screws to open the hard disk carrier. Keep the
screws for later use.
3 When applicable, pull out any previously installed hard disk.
4 Install a hard disk in the hard disk carrier then secure it with the
four screws you have removed earlier.
5 Insert the hard disk carrier into the cage with the lever still
extended.
6 Push the lever back until it clicks into place. Make sure that the
drive is properly inserted before closing the lever.
BB!H621!.!FO/cppl!!Qbhf!57!!Xfeoftebz-!Kbovbsz!9-!3114!!21;63!BN