Filter
Top Products
103
To Verify a RAID 1
If a RAID 1 is created using Quick Init, this utility can be used to verify
the array.
1 Select the RAID 1 Array from the List of Arrays.
2 Press <Ctrl> + <S> to begin RAID verification.
3 Press <Y> or <N> to accept or decline automatic repairs by the
utility.
To Rebuild RAID 1
If a RAID 1 is created with Build and Clear and then stopped, the
Rebuild function of the utility can be used to resume.
1 Select the RAID 1 Array from the List of Arrays.
2 Press <Ctrl> + <R> to begin the rebuid operation.
To Mark/Unmark an Array as Bootable
1 Select an array from the List of Arrays.
2 Press <Ctrl> + <B> to toggle wether an array is bootable.
BB!S421!.!FO/cppl!!Qbhf!214!!Gsjebz-!Nbsdi!23-!3115!!5;1:!QN