Filter
Top Products
55
7.4 Assemble Thermal Pad & Gasket Hest-sink then place contact DMD (Fig. 7-4, 7-5).
i. Press center of Heatsink before assemble spring screws, and then keeps press until
spring screw assembly finish.
i. Pre-fastening Sequence: [ 1 ] - [ 2 ] - [ 3 ] - [ 4 ].
ii. Fastening Sequence: [ 2 ] - [ 1 ] - [ 4 ] - [ 3 ].
iii. Screw Torque must be confirmed to be 6 kg-cm.
Fig. 7-4 Fig.7-5
7.5 Assemble “Lens Frame” and lock with screws well (Fig. 7-6).
Fig. 7-6
Press center of Heatsink when
assemble spring screw
○
1
○
2
○
3
○
4
Screw*3