Filter
Top Products
Chapter 2 29
Onboard Devices Configuration
The parameters in this screen are for advanced users only. You do not need to change the values in this
screen because these values are already optimized.
The Onboard Devices Configuration sub-menu assigns resources to basic computer communication
hardware.
The following table describes the parameters in this sub-menu. Settings in
boldface
are the default and
suggested parameter settings.
Parameter Description Options
Serial Port Enables or disabled the serial port.
When enabled, you can set the base I/O address and
interrupt request (IRQ) of the serial port.
Enabled
or Disabled
3F8h
, 3E8h, 2F8h or 2E8h
4
or 11
IrDA Port Enables or disables the infrared port.
When enabled, you can set the base I/O address,
interrupt request (IRQ) and direct memory access (DMA)
channel of the infrared port.
Enabled
or Disabled
2F8h
, 3E8h, 3F8h, or 2E8h
3
or 10
Parallel Port Enables or disables the parallel port.
When enabled, you can set the base I/O address,
interrupt request (IRQ) and operation mode of the
parallel port.
If operation mode is set to ECP, the direct memory
access (DMA) channel of the parallel port is set to 1.
Enabled
or Disabled
378h
, 278h, or 3BCh
7
or 5
ECP
, EPP, Standard, or Bi-directional
340SG.book Page 29 Thursday, October 28, 1999 10:51 AM