Filter
Top Products
50 Chapter 3
3. Pull the modem combo board out from its socket.
4. Disconnect the network cable from the modem combo board.
Removing the RTC
1. Use a plastic flat bladed screw driver to remove the RTC battery from its socket.
NOTE: To replace the RTC battery, press the RTC battery into the socket.
Removing the Lower Case
1. Remove the three screws, and the 11 screws on the base of the unit .
2. Remove the lower case from the main unit.
340SG.book Page 50 Thursday, October 28, 1999 10:51 AM