Filter
Top Products
62 Chapter 3
3. Detach the VGA board out from the system
4. Remove the 3 screws to release the VGA thermal module
5. Separate the thermal module from the VGA board
6. Anit-clockwise the direction with a flat screw driver to loosen the CPU
7. Detach the CPU out from the system
Removing the MDC
1. Disconnect the MDC cable from the mainboard
2. Remove the two screws to loosen the DMC board
3. Detach the MDC from the system
4. Disconnect the MDC cable from the MDC board
Removing the Wireless, Speaker and PCMCIA
1. Pop up the tabs on both side to take the Wilreless out from here