Filter
Top Products
60 Chapter 3
Disassembling the LCD Module
1. Remove the four screw caps as shown.
2. Then remove the four screws tightening the LCD bezel.
3. Detach the LCD bezel from the LCD module.
4. Then turn the LCD bezel over and remove the microphone.
5. Tear off the type fastening the inverter cable then disconnect the inverter cable then remove the inverter.
6. Remove the six screws holding the LCD to the LCD cover.
7. Then remove the LCD from the LCD cover.
.
8. Remove the two screws holding the right bracket then remove the bracket.
9. Remove the two screws holding the left bracket then remove the bracket.
10. Tear off the tape that fastens the LCD cable.
11. Disconnect the LCD cable from the LCD.