Filter
Top Products
53
7. Appendix
ᕢ Specifications
This section provides technical information about the LT35/LT30/LT25 projector's performance.
Model Number LT35/LT30/LT25
Optical
DMD Single Chip Digital Micromirror Device (DMD)
Resolution 1024 x 768 pixels* up to SXGA+ (1400 x 1050) with scaling technology
Lens Manual zoom and auto focus (effective range: 1.4 m - 5.5 m) / manual
focus
F2.4 - 2.6 f=25.7 mm - 30.8 mm
Lamp LT35: 220W AC (170W Eco mode)
LT30/LT25: 200W AC (170W Eco mode)
Image Size (Diagonal) 30" - 300" diagonal
Projection Distance 42" - 438" (wide) - 51" - 524" (tele)
1.1 - 11.1 m (wide) - 1.3- 13.3 m (tele)
Projection Angle 11.6° - 12.1° (wide) / 9.7° - 10.0° (tele)
Electrical
Inputs 1 VGA shared with component video (Mini D-Sub 15 Pin), 1 S-Video (Mini
DIN 4 Pin), 1 Video (RCA), 1 Stereo Mini Audio, 1 PC Control (Mini DIN 8
Pin)
Video Compatibility NTSC, NTSC4.43, PAL, PAL-60, PAL-N, PAL-M, SECAM,
Component : 1080i, 720p, 576p, 480p, 576i, 480i
Scan Rate Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over)
Vertical: 50 Hz to 85 Hz
Color Reproduction 16.7 million colors simultaneously, Full color
Horizontal Resolution NTSC / NTSC4.43/PAL / PAL-60/PAL-N/PAL-M/YCbCr: 540 TV lines
SECAM: 300 TV lines
RGB: 1024 dots (H) x 768 dots (V)
External Control IR, RS232C
Sync Compatibility Separate Sync / Composite Sync / Sync on G
Built-in Speaker 1W (monaural)
Power Requirement 100 - 240V AC, 50 / 60 Hz
Input Current LT35: 3.1 - 1.4A
LT30/LT25: 2.8 - 1.3A
Power Consumption LT35: 280W in Lamp Normal mode, 230W in Lamp Eco mode, 8.0W in
Standby mode
LT30/LT25: 260W in Lamp Normal mode, 230W in Lamp Eco mode, 8.0W
in Standby mode
* Effective pixels are more than 99.99%.