Filter
Top Products
21. SETTING THE PASSWORD
43
41
41
1
Press the [SELECT] button and position
the " " over the "PASSWORD" mark.
At the moment, the first two digits flash.
(The flashing means it can be changed.)
Change the first two digits.
In case of the example, press the
[CHANGE] button to set at "12". And
then press the [SET] button.
At that moment, the flashing changes
to the last two digits.
2
Change the last two digits.
In case of the example, press the
[CHANGE] button to set at "34". And
then press the [SET] button.
3
After you finish registering the password,
press the [SET] button once again.
Now the password registering has
been completed. Replace the cover
and lock.
Important: Printing will not occur
unless Step 3 is completed.
When the password is set, you are asked to enter it. If the password you entered does not
coincide with the setting, you cannot change the setting values.
You may select any 4-digit number from 0001 to 9998 as your password.
Note : Numbers "0000" and "9999" are not valid passwords.
All settings must be reset if you forget the password. Refer to the "23. RESETTING".
SELECT CHANGE SET
PASSWORD
SELECT CHANGE SET
PASSWORD
SELECT CHANGE SET
PASSWORD
MO TU WE TH FR SASU
Example: Set the password "1234".