Filter
Top Products
86
Actiontec 54 Mbps Wireless DSL Gateway User Manual
Connections
How many computers can be connected through the Gateway?
The Gateway is capable of 254 connections, but having no more than 45 con-
nections is recommended. As the number of connections increases, the available
speed for each computer decreases.
Security
What is the default username for the Gateway?
The default username for the router is admin (all lower case). To activate the
password to protect the Gateway, change the default password, which is blank by
default. Remote management is not available on the Gateway until the default
password is changed.
Does the Gateway function as a firewall?
Yes. The Gateway provides its security through the use of NAT firewall, which
acts as a physical barrier between your network and the Internet.
What is NAT and how does it protect my network?
NAT (Network Address Translation) is a type of security that masks the private
IP addresses of the computers on your network with a single public IP address.
With NAT, the private IP address of the computers on your network is never
transmitted over the Internet.
Which Virtual Private Networking (VPN) protocols are supported?
The Gateway supports pass-through for PPTP, L2TP, and IPSec.
Can I use Internet firewall or security programs with my network?
Because the Gateway uses NAT firewall security, it is not necessary to use any
other program for security. The use of third-party firewall or Internet security
software is not recommended, since certain programs create problems on a pri-
vate network (BlackIce Defender, Norton Internet Security, and ZoneAlarm, for
example).