Adaptec 44300 Computer Drive User Manual


 
Chapter 7: Installing the Driver and an Operating System 36
Installing with SCO OpenServer
You will need the SCO OpenServer CD to complete this task. To install the driver when
installing OpenServer:
1 Insert the OpenServer Installation CD.
2 Restart your computer.
3 Follow the on-screen instructions to begin the OpenServer installation.
4 When prompted to load more HBA drivers, insert the driver disk, then select Ye s . (To load
more HBA drivers, repeat this step.)
5 Insert the driver diskette, then press Enter twice to load the driver.
6 If you are installing other third-party devices, install them now. Otherwise, select No.
7 Complete the SCO OpenServer installation, following the instructions included with your
operating system.
8 Continue with Managing Your Storage Space on page 41.