Filter
Top Products
Appendix C: Using the ARC Utility ● 69
Formatting and Verifying Disk Drives
You can use the disk utilities to low-level format or verify your disk drives. (New disk drives
are low-level formatted at the factory and do not need to be low-level formatted again.)
Caution:
Before you format a disk drive, back up all data. Formatting destroys all data on
a disk drive.
To use the disk utilities:
1 Turn on your computer and press Ctrl+A when prompted to access the ARC utility.
2 From the ARC utility menu, select Disk Utilities.
3 Select the desired disk, then press Enter.
You are offered the following options:
● Format Disk—Simulates a low-level format of the disk drive by writing zeros to the
entire disk. SATA drives are low-level formatted at the factory and do not need to be
low-level formatted again.
Caution:
Formatting destroys all data on the disk. Be sure to back up your data
before performing this operation.
● Ver ify Disk Me dia—Scans the media of a disk drive for defects.
Device ID None Displays device ID
Controller Serial
Number
None Displays controller serial number
Controller WWN None Displays the controller WWN
SerialSelect Options Available Settings Description
!
!