Filter
Top Products
2-16
AMM-1570/1572 User’s Guide
AMM-1570/1572 User’s Guide
Stock Number: 510526-00, Rev. B Page: 2-16
Print Spec Number: 492379-00
Current Date: 3/7/94 ECN Date: 3/8/94
SCSI ID
Pin pairs SD, SD, and SD allow you to configure the host adapter
SCSI ID. The available settings are
Each SCSI device (including the host adapter) located on the SCSI
bus must be set to a unique SCSI ID. Refer to SCSI IDs on the SCSI
Bus on page 2-7 for additional information on SCSI ID.
Interrupt Channel (IRQ)
Pin pairs IC and IC allow you to configure an IRQ for the host
adapter. Each AMM-1570/1572 and expansion board installed in
your system must be assigned a unique IRQ. The IRQ channel
selected here must match the IRQ channel selected using pin pairs
I2, I1, I0, and I9 on Jumper Block J9. The available settings are
SD
SD SD
= ID 7 *
SD
SD SD
= ID 5
SD
SD SD
= ID 3
SD
SD SD
* = Default
= ID 1
SD
SD SD
= ID 6
SD
SD SD
= ID 2
SD
SD SD
= ID 0
SD
SD SD
= ID 4
IC IC
IC IC
IC IC
IC IC
= IRQ 9
= IRQ 11 *
= IRQ 10
= IRQ 12
* = Default