Filter
Top Products
3-19
Installing the AMM-1570/1572
AMM-1570/1572 User’s Guide
Stock Number: 510526-00, Rev. B Page: 3-19
Print Spec Number: 492379-00
Current Date: 3/7/94 ECN Date: 3/8/94
MIDI recording, refer to the documentation that accompanies your
MIDI adapter and software.
Installing Adaptec Software
Two Adaptec software packages are available to configure your
operating environment for SCSI and audio operation: Adaptec
EZ-SCSI and Adaptec EZ-Audio. Both packages are available from
Adaptec and are normally included with all AMM-1570/1572 kits.
Adaptec EZ-SCSI
If you are running MS-DOS or MS-DOS with Windows, Adaptec
EZ-SCSI makes driver installation a simple task. Adaptec EZ-SCSI is
a menu-driven software package that automatically configures your
operating environment for SCSI operation. Refer to the EZ-SCSI
User’s Guide for complete information.
To run EZ-SCSI, simply insert the EZ-SCSI installation diskette into
the floppy drive and type Install at the appropriate DOS prompt.
Towards the end of EZ-SCSI installation, you are asked if you would
like EZ-SCSI to install Adaptec EZ-Audio. To install Adaptec
EZ-Audio, you will need the Adaptec EZ-Audio installation
diskette.
Adaptec EZ-Audio
Adaptec EZ-Audio is a menu-driven software package that
upgrades your system to have audio capabilities; it automatically
installs the audio software and configures your operating
environment.
To run EZ-Audio, select Yes at the end of EZ-SCSI installation when
prompted, or insert the EZ-Audio installation diskette into the
floppy drive and type Install at the appropriate DOS prompt. Refer
to the EZ-Audio User’s Guide for detailed instructions.
Note: For first time installation, we recommend that you
run Adaptec EZ-Audio from the Adaptec EZ-SCSI
program. Adaptec EZ-SCSI allows you to completely
install all the software necessary to operate the
AMM-1570/1572.