Filter
Top Products
Brightness
To set the brightness and contrast of the screen
0 ~ 100 %
● Contrast Adjustment will be available only when FineContrast mode is
"Custom","Text","Picture" or "Movie".
Temperature
To set the color temperature
4,000 ~ 10,000 K
in 500 K increments (including 9,300 K).
Default setting is off (normal white)
● The values shown in the Kelvin are available only as a reference tool.
● Setting the temperature under 4,000 K or over 10,000 K invalidates the color temperature
setting. (The color temperature's setting turns "OFF".)
Gamma
To set the gamma value
1.4 ~ 3.0
● If setting the gamma value, the using the monitor in the digital signal input is recommended.
If using the monitor in the analog input signal, set the gamma value from 1.8 to 2.2.
Saturation
To change the saturation
-100 ~ 100
Setting the minimum level (-100) turns the
image to the monochrome.
● The <Saturation> adjustment may cause undisplayable color tone.
Hue
To change the flesh color, etc.
-100 ~ 100
● Using <Hue> adjustment may not obtain proper tone reproduction.
Gain
To change each color
(red, green and blue)
0 ~ 100%
By adjusting the red, green and blue color tones
for each mode, custom colors can be defined.
Display a white or gray background image and
adjust the <Gain>.
● The values shown in the percentage are available only as a reference tool.
● Setting the <Temperature> invalidates the <Gain> adjustment. <Gain> setting returns to the
defaul.
6 colors
To adjust <Saturation> and <Hue> in each color
(Red, Yellow, Green, Cyan, Blue and Magenta)
Hue: -100 ~ 100
Saturation: -100 ~ 100
Reset
To return the color settings of the selected mode
to the default settings
Select the <Reset>.
4-4. Power-save Setup