Filter
Top Products
ADCP-50-304 • Issue 19 • June 1999 • Section 3: PatchSwitch V.35
Page 3-9
© 1999, ADC Telecommunications, Inc.
6 RECOMMENDED MATING CONNECTOR PARTS
DESCRIPTION VENDOR PART NUMBER
Connector V.35 (Female) WINCHESTER
POSITRONICS
MRAC MS 34S
VMCT-34F-000000-538-Z
Contacts (Female) WINCHESTER
POSITRONICS
100-51024S
FC 124N2
Hood WINCHESTER
POSITRONICS
MRE34JTDH
G34-00000-40
Connector V.35 (Male) AMP INC 201357-1
Contacts (Male) AMP INC 66703-2
Note:
The hold down screws on the cable plugs for the ADC V.35 Connector Subboard are
a standard NSC 6/32 thread. Some plugs are different. They look similar but have different
pin assignments. Make sure your plugs are compatible before connecting them.
Replacement connectors can be fashioned using the above parts list. This list does not
imply that only these parts will fit. Compatible parts may be available from other vendors.