Filter
Top Products
ADCP-61-743 • Issue 3 • September 2004
Page 15
© 2004, ADC Telecommunications, Inc.
7. Assign the selections by pressing Enter or Return.
RTAU SETUP AND CONTROL
EQUIPMENT SETUP
===============
Current User : NONE Test Circuit: 1-1
Line Code : INTERNAL Mode : DISABLE
SIGNAL GENERATOR SETUP
======================
Pattern Type : QRS #: --------------------------------
Frame Format : UNFRAMED
Loop Code : NONE #: ----------------
BIT ERROR SETUP Error Counts Status Elapsed Time
=============== ============ ====== ============
Error Count : 0 Data : F Sync: ES :
Error Rate : OFF BPV : P Sync: EFS:
Error Locn : NONE Frame: RAI :
CRC :
COFA :
Test Timeout : 60 Measurement : STOP
In Minutes
Press CONTROL-A For Assistance
Figure 6. RTAU Setup and Control Screen
(Showing Defaults for Screen With Line Code Field Set to INTERNAL)
TEST ACCESS UNIT STATUS/COMMANDS
Group: 1 DS1#: 1
Drop Direction Insert Direction
============== ================
Status :
Command :
TAU Present Status: NO
Press Control-A For Assistance
Figure 7. Test Access Unit Status/Commands Screen
(If there is a TAU in the chassis, the TAU Present Status: displays YES)