ADTRAN 1200051L6 Network Card User Manual


 
Chapter 6. Configuration
61200051L1-1D ISU 2x64 Dual Port ISDN Service Unit User Manual 45
Setting Connect Timout
Connect Timout sets the length of time that the ISU 2x64 waits
for a far-end unit to answer an outgoing call. These choices are
illustrated in Figure 6-10.
Figure 6-10
Connect Timout Menu Tree
Setting Call Screening
Call Screening allows the ISU 2x64 to either answer all incoming calls
(default) or only calls originating from phone numbers stored in the
DIAL menu as stored numbers SN0 through SN9. See Front Panel
Dialing Options on page 63 to review how to store numbers. Figure
6-11 illustrates the menu tree for setting call screening.
Figure 6-11
Call Screening Menu Tree
3=CONFIG
1=Netw. options
2=DTE options
3=Protocol
4=Quick setup
5=Security
6=Remote Config
1=Dial Line
2=Leased Line
1=15 sec
2=30 sec (def)
3=1 Minute
4=2 Minute
5=4 Minute
1=Switch protocl
2=Call type
3=Terminal ID
4=Busy Out
5=Dial options
6=Auto answer
7=Answer tone
8=Connect Timout
9=Call Screening
10=SBus Terminati
3=CONFIG
1=Netw. options
2=DTE options
3=Protocol
4=Quick setup
5=Security
6=Remote Config
1=Dial Line
2=Leased Line
1=Answer any
2=Ansr if SN0. . .9
1=Switch protocl
2=Call type
3=Terminal ID
4=Busy Out
5=Dial options
6=Auto answer
7=Answer tone
8=Connect Timout
9=Call Screening
10=SBus Terminati