Filter
Top Products
48 FSU User Manual 61200.130L1-1
Chapter 6. DTE Port Configuration
1 PROTOCOL
3 SDLC
1 DTE PORT 1 1 INTERFACE TYPE 1 RS232
2 V.35
1 CONFIG
2 PHYSICAL LAYER OPTIONS 1 2400 bps
2 DTE PORT 2 2 4800 bps
3 9600 bps
4 19.2 Kbps
5 38.4 Kbps
6 56 Kbps
2 SYNCHRONOUS BIT RATE 7 64 Kbps
8 112 Kbps
9 128 Kbps
10 168 Kbps
11 192 Kbps
12 224 Kbps
13 256 Kbps
14 280 Kbps
15 320Kbps
16 384 Kbps
17 448 Kbps
18 512 Kbps
3 SYNCHRONOUS IDLE METHOD 1 TRANSMIT FLAGS
2 TRANSMIT ALL ONE
S
4 HARDWARE FLOW CONTROL 1 OFF
2 ON
1 DATA FORMAT 1 NRZ
3 PROTOCOL OPTIONS 2 POLL/RESPONSE TIMEOUT 2 NRZI
3 MINIMUM POLL TIMER
4 SLOW POLL RATIO
5 RESPONSE TIMER THRESHOLD
6 TRANSMIT DELAY
1 PU ADDRESS
2 GROUP ADDRESS
3 LLC2 SSAP
4 PROTOCOL ADDRESS TABLE 4 LLC2 DSAP
5 OUTGOING DLCI
Figure 6-5
SDLC Protocol Menu Tree
Protocol Options
Data Format (FORMAT)
Set the data format to match the attached controller or FEP line
coding. The choices are non-return-to zero (NRZ) and non-
return-to-zero inverted (NRZI).
When using NRZI format, the FSU does not derive timing from the
receive data input.