Filter
Top Products
Physical Descriptions NetVanta 4300/4400 Series
18 Copyright © 2013 ADTRAN, Inc. 61200890E2-34R
NetVanta 4305 Front Panel Design
The NetVanta 4305 front panel is shown below. Front panel LED descriptions are given in Table 1 on page
23.
Figure 1. NetVanta 4305 Front Panel Layout
NetVanta 4305 Rear Panel Design
Figure 2 shows the NetVanta 4305 (AC) rear panel and Figure 3 shows the NetVanta 4305 (DC) rear panel.
The chassis are shown with the T1/FT1 + DSX-1 NIM installed.
Figure 2. NetVanta 4305 (AC version) Rear Panel Layout
Figure 3. NetVanta 4305 (DC version) Rear Panel Layout
Rear Panel Interfaces and LEDs
CONSOLE Interface
The CONSOLE interface is an EIA-232 serial port (DCE), which provides for local management and
configuration (via a DB-9 female connector). Table A-4 on page 60 shows the
CONSOLE port pinouts.
NET/DBU and Wide Module Option Slots
The SLOT 3 WIDE MODULE slot accepts the Octal T1/E1 Wide Module. The SLOT 2 NET/DBU and
SLOT 1 NET/DBU option slots support various NIM plug-in modules. These option modules are
described in the section Option Modules on page 24.
Connection directly to an external modem requires a cross-over cable.
STATUS
NET 2
WAN
DBU
TD
RD
TD
RD
LNK
LAN 2
STATUS
ACTIVITY
TEST
WIDE SLOT 1
TD
RD
LNK
LAN 1
NET 1
WAN
DBU
TD
RD
NetVanta 4305
SLOT 1 NET/DBU
CONSOLE
SLOT 2 NET/DBUSLOT 3 WIDE MODULE
ETH 0/1
ETH 0/2
100-250VAC
50/60Hz
WAN-T1 DSX-1 DBUWAN-T1 DSX-1 DBU
SLOT 1 NET/DBU
CONSOLE
SLOT 2 NET/DBUSLOT 3 WIDE MODULE
ETH 0/1
ETH 0/2
WAN-T1 DSX-1 DBUWAN-T1 DSX-1 DBU