Filter
Top Products
NetVanta 4300/4400 Series Unit Installation
61200890E2-34R Copyright © 2013 ADTRAN, Inc. 57
Installing a CompactFlash Card
The CompactFlash slot supports only ADTRAN-provided 1 GB CompactFlash cards. Follow these
instructions when installing a card.
Figure 27. CompactFlash Card Installation
Your NetVanta unit is now ready to be configured and connected to the network. For information on
configuration for a specific application, refer to the configuration guides provided on the ADTRAN Support
Community. For details on the command line interface (CLI), refer to the AOS Command Reference Guide. All
other related documents are also available online at http://supportforums.adtran.com
.
The CompactFlash card is hot-swappable and can be inserted or removed while power is
applied to the unit.
Instructions for Installing a CompactFlash Card
Step Action
1 Slide the module into the CompactFlash slot until the card is firmly seated against the chassis.
2 The CompactFlash options will now be available in the GUI and the AOS CLI.
CompactFlash