Filter
Top Products
Chapter 4: Configuration Overview
4-28
Router Option Module User Manual 61200350L1-1
When more than one DLCI mapping is listed, the Router Option
Module will try to match the DLCIs learned from the Frame Relay
switch with the DLCI values in the map. If there is a match, the pro-
tocols specified in the map are used. However, if an active DLCI is
not in the list, the Router Option Module falls back to using IARP as
in the above paragraph to determine the protocols to use with that
particular virtual circuit.
If a static maintenance protocol is used, at least one DLCI mapping
must be specified.
If you want to... Then...
Insert a new profile Press the I key when over the Num col-
umn.
Explanation:
A new inserted profile will always be
set up with the default parameters.
Copy parameters from
an old profile to this
newly inserted profile:
Use the copy (C) and paste (P) keys.
Explanation:
Entire configuration trees can be copied
with this method.
Delete an unused profile Use the D key when the cursor is over
the number in the Num column.
Explanation:
Once deleted, the profile is gone perma-
nently as soon as the Connection List is
saved. Items may be deleted when DEL
appears below the status bar.