Filter
Top Products
61221002L2-5B B-3
HDSL MAINTENANCE MENU
From the Maintenance Menu, enter “6” to display the HDSL Maintenance Menu as shown below.
HDSL Maintenance Menu
1. ALW-MSG-HDSL
2. INH-MSG-HDSL
3. RMV-HDSL
4. RST-HDSL
5. RTRV-ALM-HDSL
←←
←←
←
Retrieve existing HDSL alarms for the H2TU-C
6. RTRV-ATTR-HDSL
7. RTRV-COND-HDSL
8. SET-ATTR-HDSL
B. Maintenance Menu
M. Main Menu
RTRV-ALM-HDSL Command
Input Format
The RTRV-ALM-HDSL command is used to retrieve existing HDSL alarms for the H2TU-C card.
<RTRV-ALM-HDSL
AID[ALL]= RT-1-21
NTFCNCDE[ALL]= CR, MJ, MN, NR
←←
←←
← Severity of alarm to retrieve
CONDTYPE[ALL]= MSGLOST, LOSW, DCCONT,
T-SNRL, INCRAI-CI, T-LA
←←
←←
← Alarms available to retrieve
SRVEFF[ALL]= NSA, SA
←←
←←
← Can choose between non-service affecting NSA and
service affecting SA
Additional HDSL Maintenance Commands
The following commands are not listed in the Maintenance Menu, but are available for execution.
INIT-REG-HDSL Command
Input Format
The INIT-REG-HDSL command is used to clear the HDSL PM data for the H2TU-C card.
<INIT-REG-HDSL
AID[ALL]= RT-1-21
← Slot of interest
MONTYPE[ALL]= ES, SES, UAS, MS, LA, SNRMIN
←←
←←
← PM parameters that can be cleared
LOCN[]= NEND, FEND,
←←
←←
← Location to clear
TMPER[]= 1-DAY, 15-MIN,
←←
←←
← Time periods available to clear
RTRV-PM-HDSL Command
Input Format
The RTRV-PM-HDSL command is used to retrieve HDSL PM data for the H2TU-C card.
<RTRV-PM-HDSL
AID[ALL]= RT-1-21
←←
←←
← Slot of interest
MONTYPE[ALL]= ES, SES, UAS, MS, LA, SNRMIN
←←
←←
← PM parameter to retrieve
LOCN[]= NEND, FEND,
←←
←←
← Location to retrieve
TMPER[]= 1-DAY, 15-MIN,
←←
←←
← Time periods available to retrieve