Filter
Top Products
61221002L2-5B 5
Provisioning Commands
Upon initial insertion of the Litespan H2TU-C into
the Litespan system, configuration options are
downloaded automatically to the line card and take
precedence over the ADTRAN default provisioning
options.
NOTE
The provisioning options stored in the shelf
controller can be pre-configured by the user
through the Litecraft Pro interface.
Table 6 and Table 7 list and define the available
HDSL provisioning commands. The H2TU-C should
be pre-provisioned as indicated under
“Pre-Configurable Value.”
sdnammoC1LTnoitpircseD
LSDH-VMR )SOO(ecivresmorfC-UT2HnapsetiLehtsevomeR
LSDH-TSR )SI(ecivresotC-UT2HnapsetiLehtserotseR
TPQE-TNE noitisoptolsaottinuasngissarosretnE
TPQE-TLD noitisoptolsaottinuasngissanuroseteleD
1T-DEroLSDH-DEtnempiuqeehtstidE
Table 3. Administration Commands
sdnammoC1LTnoitpircseD
1T-SRC-TNEnoitcennoc-ssorcasretnE
1T-SRC-TLDnoitcennoc-ssorcaseteleD
1T-SRC-VRTR snoitcennoc-ssorcgnitsixeseveirteR
Table 4. Cross-Connect Commands
sdnammoC1LTnoitpircseD
1T-GER-TINIroLSDH-GER-TINI )0(orezotseulavllastesdnaatadgnirotinomecnamrofrepsraelC
1T-MP-VRTRroLSDH-MP-VRTR atadgnirotinomecnamrofrepseveirteR
LSDH-MLA-VRTRsmralaseveirteR
Table 5. Maintenance Commands