ADTRAN MP-114 Server User Manual


 
Quick Installation Guide 3. Configuring the MediaPack
Version 5.0 19 September 2007
Figure 3-8: Configuration File Screen
4. Click the Browse button, and then navigate to the folder that contains the ini file you want to
upload.
5. Select the file, and then click the Open button; the name and path of the file appear in the
field beside the Browse button.
6. Click the Send ini File button, and then at the prompt, click OK; the gateway automatically
resets (from the version stored on the flash memory).
3.3.1.3 Modifying Parameters Specific to Site Deployment
Typically, for interoperability with the deployed PBX / PSTN interface and Office Communications
Server 2007, it's sufficient that you use the ini file obtained from AudioCodes' Web page. This file
contains all the required parameter settings for the gateway to seamlessly operate in this
application setup. However, due to specificity of site deployment, the following configurations may
need to be configured or modified:
IP address of Mediation Server (refer to Section 3.3.2.1 on page 20)
Number of FXO ports connected to the PBX (refer to Section 3.3.2.2 on page 22)
Voice coders (refer to Section 3.3.2.3 on page 23)
Numbers translation (normalization) from/to E.164 format using Manipulation tables for PBX /
PSTN connectivity - depends on deployment dial plan (refer to Section 3.3.2.4 on page 23)
Answer Supervision (refer to Section 3.3.2.5 on page 28)
Automatic Dialing (refer to Section 3.3.2.6 on page 29)
Caller ID (refer to Section 3.3.2.7 on page 30)
4
6