Filter
Top Products
Quick Installation Guide 3. Configuring the MediaPack
Version 5.0 31 September 2007
3.3.2.8 Defining SIP Transport Type
The procedure below describes how to configure the SIP transport type. You may need to change
the gateway's SIP transport type from UDP (default) to TCP, since this is the transport type used
by Mediation Server.
¾ To define the SIP transport type, take these 3 steps:
1. Open the ‘General Parameters’ screen (Protocol Management menu > Protocol Definition
> General Parameters).
Figure 3-18: General Parameters Screen
2. From the ‘SIP Transport Type' drop-down list, select 'TCP'.
3. Click the Submit button to save your changes.
2