Filter
Top Products
761433105L2-5D Section 61433105L2, Issue 4
Table 6. Series 5 Total Reach DDS Insertion
Loss Measurements
SDD
lanoitidartrofzHk82otderapmoczHk3.31
ecivresSDD
eniL
noitarugifnoCnoitarugifnoC
noitarugifnoC
noitarugifnoCnoitarugifnoC
zHk3.31@zHk82@
GWA62tfk72Bd21.05Bd53.56
GWA42tfk52.63Bd00.05Bd05.26
GWA22tfk05Bd42.05Bd33.95
Table 5. Cable Type and Temperature Loss Data @ 13.3 kHz
ELBACCITSALPtfk/SSOLBdELBACREPAPtfk/SSOLBd
)F0(CIPeguaG91
)F07(CIPeguaG91
)F021(CIPeguaG91
2035.0
3806.0
0166.0
)F0(PLUPeguaG91
)F07(PLUPeguaG91
)F021(PLUPeguaG91
6165.0
5146.0
5596.0
)F0(CIPeguaG22
)F07(CIPeguaG22
)F021(CIPeguaG22
219.0
8520.1
5101.1
)F0(PLUPeguaG22
)F07(PLUPeguaG22
)F021(PLUPeguaG22
4549.0
6060.1
0731.1
)F0(CIPeguaG42
)F07(CIPeguaG42
)F021(CIPeguaG42
1752.1
2893.1
7194.1
)F0(PLUPeguaG42
)F07(PLUPeguaG42
)F021(PLUPeguaG42
0092.1
4234.1
8625.1
)F0(CIPeguaG62
)F07(CIPeguaG62
)F021(CIPeguaG62
1576.1
9648.1
8069.1
)F0(PLUPeguaG62
)F07(PLUPeguaG62
)F021(PLUPeguaG62
3286.1
8658.1
8179.1
NOTE
Measure noise with 50 kbit weighting
characteristic approximating a filter with a
passband of 40 Hz to 30 kHz. Background
noise level or impulse noise level is referenced
from 56/64 kbps data rate in TR62310.
6. MAINTENANCE
The Total Reach DDS-DP does not require routine
maintenance for normal operation.
Compliance Requirements
CAUTION
This product for installation in a restricted
access location in a Type B or E enclosure
only.
Max input current @ max load = 165 mA @ -48 Vdc.
Max output current @ max load = 41 mA @
-140 Vdc.
NOTE
The 50 dB AML limit includes 6 dB of signal
margin to account for potential near-end
cross talk (NEXT) from other digital services
that may be provisioned in the same binder
group.
• Loop length should not exceed 50 kft.
• Bridged tap length should not exceed 12 kft.
• Background noise level should not exceed
34 dBrn.
• Impulse noise should not exceed
-40 dBm, (+50 dBrn).
Table 7. Compliance Codes
Code Input Output
PC F C
TC – X
IC A –