AEG PROTECT B. 1500 Power Supply User Manual


 
4
Claims in connection with supplied goods must be submitted
within eight days of receipt, along with the packing slip.
Subsequent claims cannot be considered.
The warranty does not apply for damage caused by non-
compliance with these instructions (such damage also includes
damaging the warranty seal). AEG will accept no liability for
consequential damage. AEG will rescind all obligations such
as warranty agreements, service contracts, etc. entered into
by AEG and its representatives without prior notification in the
event of maintenance and repair work being carried out with
anything other than original AEG spare parts or spare parts
purchased by AEG.
Handling
PROTECT B. is designed and constructed so that all
necessary steps for start-up and operation can be performed
without any internal manipulation of the unit. Maintenance and
repair work may only be performed by trained and qualified
personnel.
Illustrations are provided to clarify and facilitate certain steps.
If danger to personnel and the unit cannot be ruled out in the
case of certain work, it is highlighted accordingly by
pictograms explained in Chapter 3.
Hotline
If you still have questions after having read these operating
instructions, please contact your dealer or our "Hotline":
Tel.: +49 (0)180 5 234 787
Fax: +49 (0)180 5 234 789
Internet: www.AEGpartnernet.com
Copyright
No part of these operating instructions may be transmitted,
reproduced and/or copied by any electronic or mechanical
means without the express prior written permission of AEG.
© Copyright AEG 2009. All rights reserved.