Filter
Top Products
43
is providing battery power to your equipment. On the
other hand, the LED indicator gives you a warning
which will flash every two seconds when the battery is
low.
9.
LED: Bar chart LEDs showing UPS utilization.
The LED indicator and the load level indicator will
illuminate to show the load level; linearly subdivided in
25% steps.
10.
LED: Bar chart LEDs showing battery capacity
(remaining standby time). The
LED indicator and
battery level indicator will illuminate to show battery
level. Each LED indicator displays a 25% capacity
level.
11. PSDR FAIL: LED error display for corrupt inverter.
12. FAULT: Central error LED display, e.g. when UPS is
overloaded or encounters a short circuit on the output.
13. BAD BAT.: LED for battery problem (e.g.
discharged). The LED indicator will flash every two
seconds when the battery failes or if the battery is
disconnected. Please check your battery connection;
replace the battery or contact your local dealer for a
battery replacement kit.
14. OVERLOAD: LED for violation of overload time limit.
The LED indicator will light on when the UPS overload
timeout. (Information concerning the time limit is
available in chapter 3.4).