Filter
Top Products
12
1Method 3: Use My Network Places.
Step 1 Double click on My Network Places and you should be able to see the NAS
device listed.
If you don’t see it you can manually enter the hostname of the device into the address
bar of either your Windows explorer or web browser by typing in “\\airnas”.
In either case once you are able to see the device, you need to double-click on the
Configure folder and then double-click on the Configure.html file to open up the
configuration.
Step 2 To enter the configuration screen it will require you to enter the proper username
and password. The default username is admin and the default password is admin. Be
sure to enter it all lowercase.
If you ever change the username or password and forget, you will need to perform the
factory reset procedure to reset the system to factory defaults. To do this: Press and
hold both the “Shutdown” and “Backup” buttons simultaneously for 6 seconds to reset
the device to factory default settings.