Filter
Top Products
22
FTP Max Connections per IP: This is the maximum number of connections a single
computer can make with the FTP Server. Generally files are copied one at a time per
connection, setting this number to more than one will allow multiple connections so that
multiple files can be copied (or downloaded) at a time.
FTP Max Clients: This is the total maximum number of connections that the FTP server
will allow. This is generally used when there is not enough bandwidth available to
support each connection with an adequate data transfer speed (as determined by the
administrator).
5.3 Storage Configuration – Access Control
Under the Access Control Menu of the NAS Configuration you can configure the file
sharing mode of the NAS device as well as specific settings for each mode. As
previously mentioned there are two modes, Guest mode and Authorization mode. In
Guest mode, the drive is simply shared to everyone who wants to access the data on
the drive, and there are no specific settings to configure. This mode is recommended for
most users.
Quota Configuration: If this option is enabled, each user is allocated a specific amount
of storage space which cannot be surpassed. Note that this option is only applicable to
the Authorization Mode.
User Configuration: Clicking on this button will bring up the User configuration window
where you can Add and Delete Authorized users and allocate a disk quota for each user.
Each user must have a username and password and maximum number of different user
accounts is 20.