Filter
Top Products
27
7. Administration
This section of the configuration deals with various administration options such as
changing the administrator password along with performing firmware updates. There
are also options to Backup and Restore the current system configuration of the NAS
device.
7.1 Administration – Management
Here you can change the system password by entering the old password and typing in
the new password and confirming it. The default password is admin
7.2 Administration – Firmware Upgrade
This page displays the current firmware version and allows you to upgrade to a newer
firmware if available. Typically any updated firmware can be found at our website at
http://www.airlink101.com
and must be downloaded and saved to your local hard drive
and unzipped before it can be used. Once it is unzipped you can click the Browse
button to select the new firmware file and then click on the Start to Upgrade button to
begin the Upgrade process. Do not power down or restart the NAS Device until the
upgrade process is complete.