Filter
Top Products
13
Advanced Setup
Use the list on the left side of the screen to navigate to the desired page.
Configuration – IP Address
MAC Address: Displays the Access Point’s MAC Address. This value cannot be
changed.
Get IP From-: Select Manual (Static IP) or DHCP (Dynamic IP) as the method you will
use to assign an IP address to the Access Point. It is recommended that you keep this
setting to the default (Manual).
IP Address: The IP address of the Access Point. The default IP address is 10.0.0.1
Subnet Mask: The subnet mask of the Access Point. The default subnet mask is
255.0.0.0