Filter
Top Products
16
Configuration – WLAN Parameter Settings
Wireless Band: Select to set the signal to 802.11g or 802.11g/802.11b.
SSID: The name designated for a specific Wireless Local Area Network (WLAN). The
default SSID is default. You can enter any name to match your existing wireless network.
All wireless devices must share the same SSID in order to connect to each other.
SSID Broadcast: Select to Enable or Disable the broadcast of the SSID across the
network.
Radio Frequency The radio frequency will remain at 2.437 GHz.
Channel: The default channel number is 6. All devices on your wireless network must
use the same channel. You can select any number to match your existing wireless
network.
Data Rate: Select the data rate from Auto, 1Mbps, 2Mbps, 5.5Mbps, 6Mbps, 9Mbps,
11Mbps, 12Mbps, 18Mbps, 24Mbps, 36Mbps, 48Mbps, 54Mbps. It is recommended to
keep this setting as Auto.
Beacon Interval: Beacons are packets sent by an access point to synchronize a
network. Specify a beacon interval value. The default (100) is recommended.
DTIM (Delivery Traffic Indication Message): 3 is the default setting. DTIM informs
clients of the next window for listening to broadcast and multicast messages.