Filter
Top Products
7
Establishing Wireless Connection
Below are the default wireless settings of the access point. You must configure your
wireless network adapter to the same settings in order to establish a wireless connection
with the access point.
SSID: default
Operating Mode: Infrastructure
Authentication: Open System
Encryption: disabled
Restart your computer after establishing a signal strength/link quality with the access
point.
Configuring the Access Point (Optional)
By default, the Access Point is set to function as an AP which bridges the wireless clients
with the wired part of your network. If you need to use the Access Point other than as an
AP, or if you want to enable encryption, you’ll need to configure it through its web
configuration utility.
To access the Access Point’s web configuration utility, you’ll need to assign a static IP
address of 10.0.0.x (where x is any number between 2 - 254) to your computer. Please
follow the steps below to assign a static IP address.
Step 1 Right-click on My Network Places from your desktop and click on Properties.
(For Windows 98, right-click on Network Neighborhood and click on Properties).