Filter
Top Products
24
least 3 of 4 sides of the processor and heatsink must be at least 0.2
inches. All cables (for floppy drive, hard drive, CD-ROM, etc.) must be
routed clear of the CPU and its airspace.
Fan Exhaust
The CPU must be kept cool by using a fan with heatsink. The tempera-
ture of the air entering the fan/heatsink cannot exceed 45
o
C (113
o
F).
The ambient or room temperature must be below 37
o
C (99
o
F).
Jumper JP1
CMOS Clear Select
If, for some reason, the CMOS becomes corrupted, the system can be
reconfigured with the default values stored in the ROM BIOS. To load
the default values, power off your system and set JP1 to On. Power on
your system. After you boot up an operating system, turn your system
off again. Set JP1 back to its default setting, Off.
Jumper Settings for CMOS Clear
On: CMOS Clear
Off: Normal
(default)
JP1