Filter
Top Products
61
3. Verify that the attached serial device works by attaching it to a serial
port that is working and configured correctly. If the serial device
does not work, either the cable or the serial device has a problem. If
the serial device works, the problem may be due to the onboard I/O
or the address setting.
4. Make sure the COM port settings and I/O address are configured
correctly.
Keyboard
Nothing happens when a key on the keyboard was pressed.
1. Make sure the keyboard is properly connected.
2. Make sure there are no objects resting on the keyboard and that no
keys are pressed during the booting process.
System Board
1. Make sure the add-in card is seated securely in the expansion slot.
If the add-in card is loose, power off the system, re-install the card
and power up the system.
2. Check the jumper settings to ensure that the jumpers are properly
set.
3. Verify that all SIMMs are seated securely into the SIMM sockets.
4. Make sure the SIMMs are in the correct locations.
5. If the board fails to function, place the board on a flat surface and
seat all socketed components. Gently press each component into
the socket.
6. If you made changes to the BIOS settings, re-enter setup and load
the BIOS defaults.