Filter
Top Products
10
INTEGRAL LAN Registration and mounting
After installing the software, you need to register your INTEGRAL LAN if you are using new Integral drive
in Network Mode. The steps below will guide you through the Registration Wizard which will help detect
your new device.
NOTE: Connect the INTEGRAL LAN to network and turn it on before continuing.
2.
Enter a chosen name for this device and
press Next to continue.
3.
Enter your Iintegral LAN ID and KEY (see step 2
of Hard disk installation). Click next to continue.
NOTE: A key is needed to write to this NDAS
device. If the Write key is not provided, users of
this system are restricted to Read Only from this
device.
1.
Click on the NDAS Device Management Icon
located on the system tray and select “Register a
New Device”. The “NDAS registration Wizard”
will appear. Select NEXT to contiunue.
Network Connection