Filter
Top Products
6 Lost Speed Touch Home
40 / 88
3EC 17058 AAAA TCZZA Ed. 02
In figure 22 all these steps are shown as an example of resetting
STHome's IP Address to 10.0.0.145.
Figure 22 Example of a PingĆofĆLife Procedure
10. Browse to the STHome local web pages and click
to
make the new IP address permanent.
TIP
'Ping -t' command
You can avoid waiting 30 and then 60 seconds by proceeding as
follows:
1. If step 2. of the previous procedure is executed, continue as
below:
2. Ping the IP address with the command:
ping –t <STHome IP address>.
3. Power on the STHome.
4. After the POST, the STHome will reply to the ping.
5. Terminate the continuous ping by pressing CTRLĆC.
6. Save the IP address via the STHome local web pages.
Note If your PC is equipped with multiple PCĆNICs, make sure that the
procedure is applied to the one connected to the STHome. Therefore
modify the arpĆsyntax as follows:
arp –<a, s, d> <STHome IP address>
–N <interface IP address>
In this syntax, <Interface IP address> identifies the particular
PCĆNIC.