Filter
Top Products
7 Speed Touch Home Local Configuration
54 / 88
3EC 17058 AAAA TCZZA Ed. 02
In special circumstances, routes can be manually added to the
routing information base, via the bottom row of the 'IP Route table'.
In order to add a route the following specific fields must be filled out:
" Destination IP prefix
" Source IP prefix
" Gateway IP address
" Intf
Note An IP prefix is the combination of an IP address and (Sub)Netmask:
e.g. 10.0.0.138/32.
The criteria for a route to be valid are:
" The destination and source entries must contain correct prefixes
" The gateway must be directly connected
Note Deleting an IP address automatically removes all related routes in
both Routing tables.
7.1.7 The PPTP Connections Web Page
Click to recall the Speed TouchHome PPPoAĆtoĆPPTP
Relaying web page. A 'PPTP Connections' table on this web page
presents relevant PPPoA/PPTP connection information.
Figure 30 'PPTP Connections' Web Page