Aleratec 280118 Computer Hardware User Manual


  Open as PDF
of 50
 
www.aleratec.com
4
Precautions
Before installing your 1:3 DVD/CD RoboRacer MultiDrive SA, please read
the following.
Installation
Avoid placing the 1:3 DVD/CD RoboRacer MultiDrive SA in a location
subject to:
• High humidity
• High temperature
• Excessive dust
• Mechanical vibration
• Direct sunlight
• Electromagnetic radiation
Operation
Do not move the 1:3 DVD/CD RoboRacer MultiDrive SA during operation.
This may cause it to malfunction during operations.
Note:ChooseaGoodLocation
1. Allowadequateclearanceformovingparts.
2. Whenplacingtheduplicatorontheside/edgeofatabletopensure
thatallfourfootpadsareincompletecontactwiththesurfaceof
thetable.
3. Donotplacenearheatsourcessuchasradiatorsorairducts,or
inaplacesubjecttodirectsunlight,excessivedust,mechanical
vibrationorshock.
4. Goodcarewillhelpassuremaximumproductlife.Improper
operatingenvironmentandmisusemayvoidthewarranty.
5. Turntheduplicatoroffandleaveunpluggedwhennotinuse.
 previous next