Filter
Top Products
www.aleratec.com
13
Using the DVD/CD Duplicator
Main Menu: USB Mode
The “USB mode” activates the connection from the 1:3 DVD/CD
RoboRacer MultiDrive SA built in hard disk drive to a PC.
1. Press the LEFT/RIGHT arrow keys (
) to navigate to the “USB
Mode” function.
2. Press ENTER (ENT) and the system will ask you if you want to enter
the “USB mode”.
3. Press ENTER (ENT) again to make the connection.
Allow the duplicator and the PC time to register the USB connection
before accessing the drives on the RoboRacer MultiDrive SA.
Once the USB connection is made, in order to edit “USB Mode” and
press ESCAPE and then ENTER to leave the USB connection and
return to the “Stand Alone Mode”.
You cannot see the HDD or DVD/CD drives in “My Computer” because
the HDD is formatted with a special le format that can only be read by
the RoboRacer MultiDrive SA controller. Only the “Image Manager”
program, covered in the next pages, can send les to the HDD.
USB Mode
Enter USB Mode
Are you sure ?