Filter
Top Products
www.aleratec.com
14
Using the DVD/CD Duplicator
Main Menu: USB Mode - continued
First install the Image Manager software included on the Software/User
Guide CD.
UsingImageManager
1. Once the Image Manager software is installed, put the RoboRacer
MultiDrive SA into USB Mode and connect the device to your PC.
2. After Windows has nished registering the device you will have access
to the HDD through the Image Manager software.
3. To load an image le to the RoboRacer MultiDrive SA’s HDD, start the
Image Manager software.
4. The rst screen that will appear will be the image you see below.
Select the “Manage Images” button located at the lower left corner of
the screen.
5. After clicking on the “Manage Images” button, you will see a table
where each partition is or will be located on the HDD.