Alienware Aurora Personal Computer User Manual


 
32
CHAPTER 4: USING YOUR DESKTOP
Frequency/Voltage Control
CPU Speed
Displays the current processor speed.
Memory Speed
Displays the current memory speed.
Current QPI Speed
Displays current QPI speed.
QPI Frequency
Allows you to change the QPI
frequency.
Memory Ratio
Allows you to change the memory
ratio.
Core (Non-Turbo) Ratio
Displays the ratio between the
processor core clock and the FSB
frequency.
Advance DRAM Conguration
Allows you to access the Advance
DRAM Conguration submenu
Overclock Conguration
Allows you to access the Overclock
Conguration submenu
Overvoltage Conguration
Allows you to access the Overvoltage
Conguration submenu
Load Level1 OC Setting
Allows you to restore the Level 1
overclocking settings that were
shipped from the factory (only
displayed with an XE processor).
Advance DRAM Conguration Submenu
Memory-Z
Opens submenu to display the SPD
conguration for each memory
module.
Advanced Memory Settings
Allows you to toggle to Manual mode
and set all of the timing parameters.
tCL
Displays the Column Address Strobe
Latency (editable in Manual Mode).
tRCD
Displays timing of RAS to CAS delay
(editable in Manual Mode).
tRP
Displays timing of RAS Precharge
(editable in Manual Mode).
tRAS
Displays timing of Row Address
Strobe (editable in Manual Mode).
tRFC
Displays timing of Refresh to Archive/
Refresh cycle time (editable in Manual
Mode).
tWR
Displays timing of Write Recover
(editable in Manual Mode).
tWTR
Displays Write to Read Delay (editable
in Manual Mode).